View 70EPF06J_1201233.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bulletin I2154 rev. C 12/02
QUIETIR Series 70EPF..
FAST SOFT RECOVERY RECTIFIER DIODE VF< 1.33V @ 70A t rr = 70ns VRRM 200/ 600V
Major Ratings and Characteristics Characteristics
IF(AV) 180 Sin. Conduction @ TC = 97 C VRRM range IF(RMS) VF trr TJ @ 70A, TJ = 25C @ 1A, -100A/s range
Description/Features
70EPF..
70
Units
A
The 70EPF.. fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Available in the new PowIRtab TM package, this new series is suitable for a large range of applications combining excellent die to footprint ratio and sturdeness connectivity for use in high current environments. Typical applications are both: Output rectification and freewheeling in inverters, choppers and converters Input rectifications where severe restrictions on conducted EMI should be met.
200/ 600 135 1.33 70 - 40 to 150
V A V ns C
Case Styles 70EPF.. 70EPF..J
(*) for higher voltage up to 1600V contact factory
www.irf.com
1
70EPF.. QUIETIR Series
Bulletin I2154 rev. C 12/02
Voltage Ratings
Part Number VRRM , maximum peak reverse voltage V
200 400 600
VRSM , maximum non repetitive peak reverse voltage V
300 500 700
IRRM 150C mA
13
70EPF02 70EPF04 70EPF06
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM I2t Max.PeakOneCycleNon-Repetitive Surge Current Max. I2t for fusing
70EPF..
70 850 1000 3600 5100
Units Conditions
A A A2 s @ TC = 97 C, 180 conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A2s 10ms, no voltage reapplied
I2t
Max. I2t for fusing
51000
Electrical Specifications
Parameters
VFM rt Max. Forward Voltage Drop Forward slope resistance
70EPF..
1.33 3.65 0.918 0.1 13
Units Conditions
V m V mA TJ = 25 C TJ = 150 C VR = rated VRRM @ 70A, TJ = 25C TJ = 150C
VF(TO) Threshold voltage I RM Max. Reverse Leakage Current
Recovery Characteristics
Parameters
trr Irr Qrr S Reverse Recovery Time Reverse Recovery Current Reverse Recovery Charge Snap Factor
70EPF.. Units Conditions
200 4 0.67 0.5 ns A C IF @ 70Apk @ 25A/ s @ 25C
2
www.irf.com
70EPF.. QUIETIR Series
Bulletin I2154 rev. C 12/02
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range
70EPF..
- 40 to 150 - 40 to 150 0.35 40 0.2 6 (0.21) Min. Max. 6 (5) 12 (10)
Units
C C C/W C/W C/W g (oz.) Kg-cm (Ibf-in)
Conditions
RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight MountingTorque Case Style
Maximum Allowable Case Temperature (C)
DCoperation
Mounting surface , smooth and greased
PowIRtabTM
Maximum Allowable Case Temperature (C)
150 140 130 120 110 100 90 80 70
150 140 130 120 110 100 90 80 70 0 20
30
70EPF.. Series R thJC(DC) = 0.35 K/W
70EPF.. Series R thJC (DC) = 0.35 K/W
Conduction Period
30 60 90 120 180
60 90 120 180 DC
60 Conduction Angle 50 0 20 40
60
80
40
60
80
100
120
Average Forward Current (A) Fig. 1 - Current Rating Characteristics
Maximum Average Forward Power Loss (W)
Average Forward Current (A) Fig. 2 - Current Rating Characteristics
Maximum Average Forward Power Loss (W)
120 100 80 60 40 20 0 0
180 120 90 60 30 RMS Limit
160 140 120 100 80
DC 180 120 90 60 30
RMS Limit
60 40 20 0 0 20 40
Conduction Period
Conduction Angle
70EPF.. Series T = 150C
J
70EPF.. Series T J = 150C
10
20
30
40
50
60
70
60
80
100
120
Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics
Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics
www.irf.com
3
70EPF.. QUIETIR Series
Bulletin I2154 rev. C 12/02
Peak Half Wave Forward Current (A)
Peak Half Wave Forward Current (A)
900 800 700 600 500 400 300 200 1
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
1000
Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial Tj = 150C 800 No Voltage Reapplied Rated Vrrm Reapplied
900
700 600 500 400 300 200
70EPF.. Series
70EPF.. Series
10
100
100 0.01
0.1
1
10
Number of Equal Amplitude Half Cycle Current Pulses (n) Fig. 5 - Maximum Non-Repetitive Surge Current
Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current
1000
Instantaneous Forward Current (A)
100
TJ = 25C
10
TJ = 150C
70EPF.. Series
1 0 1 2 3 4
Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics
Maximum Reverse recovery Time - trr (s)
70EPF.. Series T J = 25C I FM= 70 A 30 A
Maximum Reverse recovery Time - trr (s)
0.25
0.5
70EPF.. Series T = 150C J
0.2
0.4
I FM = 70 A
0.15
10 A 5A
0.3
30 A 10 A
0.1
1A
0.2
5A 1A
0.05 0 20 40 60 80 100
Rate Of Fall Of Forward Current - dI/dt (A/s) Fig. 8 - Recovery Time Characteristics, TJ = 25C
0.1 0 20 40 60 80 100
Rate Of Fall Of Forward Current - dI/dt (A/s) Fig. 9 - Recovery Time Characteristics, TJ = 150C
4
www.irf.com
70EPF.. QUIETIR Series
Bulletin I2154 rev. C 12/02
Maximum Reverse recovery Charge - Qrr (C) Maximum Reverse recovery Charge - Qrr (C)
2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2
70EPF.. Series T J = 25 C
I
FM
= 70 A
5 4.5 4 3.5 3 2.5 2 1.5 1 0.5
70EPF.. Series T J = 150 C
I
FM
= 70 A
30 A 10 A
30 A 10 A 5A 1A
5A 1A
0 10 20 30 40 50 60 70 80 90 100
Rate Of Fall Of Forward Current - dI/dt (A/s) Fig. 10 - Recovery Charge Characteristics, TJ = 25C
0 10 20 30 40 50 60 70 80 90 100
Rate Of Fall Of Forward Current - dI/dt (A/s) Fig. 11 - Recovery Charge Characteristics, TJ = 150C
Maximum Reverse recovery Charge - Irr (A)
Maximum Reverse recovery Charge - Irr (A)
14 12 10 8 6 4 2 0 10 20 30 40 50 60 70 80 90 100
Rate Of Fall Of Forward Current - dI/dt (A/s) Fig. 12 - Recovery Current Characteristics, TJ = 25C
Transient Thermal Impedance Z thJC (C/W)
100
70EPF.. Series T J = 150C
I FM = 70 A 30 A 10 A
70EPF.. Series T J = 25 C
I
FM
= 70 A 30 A 10 A 5A
10
5A 1A
1A
1 10 20 30 40 50 60 70 80 90 100
Rate Of Fall Of Forward Current - dI/dt (A/s) Fig. 13 - Recovery Current Characteristics, TJ = 150C
1
Steady State Value (DC Operation)
D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08
0.1
Single Pulse
70EPF.. Series
0.01 0.0001
0.001
0.01
Square Wave Pulse Duration (s)
0.1
1
Fig. 14 - Thermal Impedance Z thJC Characteristics
www.irf.com
5
70EPF.. QUIETIR Series
Bulletin I2154 rev. C 12/02
Outline Table
Case Style PowIRtabTM Dimensions in millimeters and (inches)
Case Style PowIRtabTM "J" version Dimensions in millimeters and (inches)
6
www.irf.com
70EPF.. QUIETIR Series
Bulletin I2154 rev. C 12/02
Ordering Information Table
Device Code
70
1
E
2
P
3
F
4
06
5
J
6
Base Cathode 1
1 2 3 4 5 6 65
-
Current Rating Circuit Configuration: E P F = Single Diode = TO-247AC = Fast Recovery
(*)
TM
2 Anode
Package: Type of Silicon: 02 = 200V 04 = 400V 06 = 600V Voltage code: Code x 100 = VRRM none = PowIRtab standard J = Short Lead Version6
(*) for higher voltage up to 1600V contact factory
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/02
www.irf.com
7

▲Up To Search▲

Price & Availability of 70EPF06J

	To Download 70EPF06J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .